Maharashtra State Board 12th Organisation of Commerce and Management Solutions Chapter 1 Principles of Management

1. (A) Select the correct option and rewrite the sentence

Question 1.
………………… was regarded as Father of Scientific Management.
(a) Henry Fayol
(b) F. W. Taylor
(c) Philip Kotler
Answer:
(b) F. W. Taylor

Question 2.
Principle of ……………… is based on ‘A place for everything and everything in its place’.
(a) Discipline
(b) Order
(c) Equity
Answer:
(b) Order

Maharashtra Board OCM 12th Commerce Solutions Chapter 1 Principles of Management

Question 3.
Member of organization should receive orders from ………………..
(a) many superior
(b) one superior
(c) all superiors
Answer:
(b) one superior

Question 4.
Scalar chain means the hierarchy of …………….. from the top level to the lower level for the purpose of communication.
(a) discipline
(b) unity
(c) authority
Answer:
(c) authority

Question 5.
Taylor recommended total ……………….. foremen to control the various aspects of production.
(a) eight
(b) three
(c) two
Answer:
(a) eight

1. (B) Match the pairs

Group A	Group B
A) Henry Fayol	1) Eight Foremen
B) Principle of Unity of Direction	2) F.W. Taylor
C) Principles of Management	3) Proper division of all activities
D) Scientific Management Theory	4) general guidelines
E) Functional Organization	5) A place for everything and everything in its place
	6) One head-one plan
	7) Low wage rate
	8) Harmony between the employees and management
	9) German engineer
	10) Modern Management

Answer:

Group A	Group B
A) Henry Fayol	1) Modern Management
B) Principle of Unity of Direction	2) One head-one plan
C) Principles of Management	3) general guidelines
D) Scientific Management Theory	4) F.W. Taylor
E) Functional Organization	5) Eight Foremen

1. (C) Give one word/phrase/term for the following statements:

Question 1.
The study of movement of an employee as well as machine while completing particular task.
Answer:
Motion Study

Question 2.
The technique of observing and recording the time required by an employee to complete a given task.
Answer:
Time Study

Question 3.
Study consists of an organised, systematic and critical assessment of various activities.
Answer:
Work Study

Question 4.
The principle which deals with ‘to do work with innovative way’.
Answer:
Principle of Initiative

Question 5.
The principle which is based on ‘a place for everything and everything in its place’.
Answer:
Principle of Order.

1. (D) State whether the following statements are True or False

Question 1.
The principles of management are universal in nature.
Answer:
True

Question 2.
Management principles are applied differently under different situations.
Answer:
True

Question 3.
Only some principles of management are important.
Answer:
False

Question 4.
Henry Fayol has given different techniques of management.
Answer:
False

Question 5.
F. W. Taylor has proposed 14 principles of management.
Answer:
False

Question 6.
Each member of organisation should receive orders only from one superior.
Answer:
True

1. (E) Find the odd one.

Question 1.
Principle of Authority and Responsibility, Motion Study, Principle of Division of Work, Principle of Discipline.
Answer:
Motion Study

Question 2.
Fatigue Study, Principle of Unity of Command, Work Study, Motion Study.
Answer:
Principle of unity of Command

1. (F) Answer in one sentence

Question 1.
What is principle of unity of command?
Answer:
Principal of unity of command implies that every employee should receive orders and instructions from one boss only and he should be responsible and accountable to him only.

Question 2.
What is standardization of tools and equipment?
Answer:
Standardisation of tools and equipment refers to providing the standard tools and equipment for production and maintaining standard working conditions and environment at the place of work.

Question 3.
What is differential wage rate?
Answer:
Differential wage rate means offering higher rate of wages to those employees who complete the work more than the standard quantity and lower rate of wages to those employees who perform below the standard fixed.

Question 4.
What is Subordination of Individual Interest into Organisational Interest?
Answer:
Subordination of individual interest into organisational interest means the interest of an individual must be given less importance than the interest of the organisation.

Question 5.
What is the meaning of principle?
Answer:
Principle means a fundamental truth or proposition that serves as the foundation for a system of belief or behaviour or for a chain of reasoning.

1. (G) Correct the underlined word and rewrite the following sentences.

Question 1.
Security in job always affects adversely on the efficiency of employees.
Answer:
Insecurity in job always affects adversely on the efficiency of employees.

Question 2.
Esprit de corps means ‘division is strength’.
Answer:
Esprit de corps means ‘unity is strength’.

Question 3.
Each member of organisation should receive orders from only one subordinate.
Answer:
Each member of organisation should receive orders from only one superior.

Question 4.
Decentralisation means concentration of powers and authorities at a specific position.
Answer:
Centralisation means concentration of powers and authorities at a specific position.

Question 5.
Management techniques are applied differently under different conditions.
Answer:
Management principles are applied differently under different conditions.

2. Explain the following terms/concepts

Question 1.
Motion Study
Answer:
(1) This is one of the important techniques f of scientific management developed by E W. Taylor. Motion study refers to the movements of employees, as well as movement of machine while completing . a particular task. The motion study helps the manager to know the movements required for a person to do a particular job.

(2) This study is useful to manager to eliminate the unnecessary movements or their sequence for doing the job. It also helps the manager to combine some actions or movements in the process. It increases efficiency and productivity of the employees and helps in reducing the wastage of time, raw material and improving the usefulness of resources.

Question 2.
Differential Piece Rate System.
Answer:
(1) According to F. W. Taylor, the differential piece wage rate plan is necessary to motivate the employees to attain higher standard performance and to earn remuneration at a higher rate. Differential piece wage rate plan suggests that remuneration should be fixed and paid in such a way that average worker is motivated to attain standard output.

(2) In differential piece wage rate plan, the. standard is determined for production by the management. The workers who produce more them the standard are to be paid more in the form of incentives and those who produce less than the standard are to be paid less by way of penalty. This technique encourages those who perform well and motivates those who have performed less than the standard required to improve their performance.

(3) Taylor suggested the differential piece wage system and further stated that the discrimination should be made between the efficient and inefficient workers. This technique explains that, efficient workers should be paid more remuneration in comparison to inefficient workers.

(4) Thus, the differential piece-rate wage plan technique motivates the able employees to attain higher performance and earn wages at higher rate.

Question 3.
Fatigue Study
Answer:
The term ‘fatigue’ implies physical or mental exhaustion. Long working hours with insufficient breaks, heavy working tools, target pressure and poor working conditions lead to fatigue. It reduces efficiency of the employees and creates adverse effect on their health. To reduce fatigue it is very important to keep and maintain the operational efficiency of the workers.

Question 4.
Time Study.
Answer:
(1) Time study is one of the important techniques of scientific management developed by E W. Taylor. Time study is useful to the manager to determine and record the time needed to complete a particular job or task. It is based on the speed of average worker.

(2) Under this technique of scientific management, every part of the entire work is considered in detail and the time required to complete each element of job or task is ascertained. On the basis of the time study, the manager determines the standard time required to complete a particular job. This also facilitates the manager to decide the remuneration to be paid and efficiency of the worker and to control the cost of work.

3. Study the following case/situation and express your opinion.

Question 1.
Mr. Harshad is an entrepreneur and engaged in production of eco-friendly utensils. Both male and female workers are working in his factory. All male employees are directly working on machines whereas female employees are working in Packaging Department. Mr. Sharath is working as Finance Manager while Mrs. Naina is working as HR Manager who is responsible for recruiting employees in the factory. On this basis:
(i) Identify any one principle of management in above case.
(ii) What is the designation of Mrs. Naina in this organisations?
(iii) Who is responsible for overall planning of the organisation?
Answer:
(i) In the above case, principle of Division of work is identified.
(ii) The designation of Mrs. Naina is Human Resource Manager.
(iii) Mr. Harshad, an entrepreneur of eco-friendly utensils, is responsible for overall planning ; of the organisation.

Question 2.
In ‘Fine Diamonds Ltd.’ 200 employees are working in three shifts. In first shift 60 employees, in second shift 60 employees and in third shift 80 employees are working without sufficient breaks except lunch break and shift change break. No employee is able to complete the work in designated time due to inappropriate time management which results into delay for next shift employees.
(i) Identify which scientific principle needs to be followed by the company.
(ii) Suggest two scientific techniques which can be used for smooth flow of work in ‘Fine Diamonds Ltd.
(iii) Why the work is not being completed in time?
Answer:
(i) In the above case, Principle of scientific management called Science, Not Rule of Thumb needs to be followed.
(ii) Work study based on the technique of fatigue study and Scientific task setting can be used for smooth flow of work in ‘Fine Diamonds Ltd.’
(iii) Reasons for non-completion of work in time are:

Long working hours without sufficient breaks reduces the efficiency of labour.
Inappropriate time management (planning) done by the departmental head (Functional Manager) result into delay for next shift employees.
Standard required time and standard output are not defined by the manager or management of “Fine Diamonds Ltd.”

4. Answer in brief

Question 1.
Explain any five principles of management of Henry Fayol.
Answer:
(1) Principle of Division of Work : According to this principle, the entire work such as technical, financial, commercial, accounting, management and security operations should be assigned to different employees as per their qualification, qualities, capabilities and experience. It gives benefits of specialisation and improves efficiency and expertise of employees. This in turn helps to attain expected productivity level.

(2) Principle of Authority and Responsibility:
Authority implies right or freedom to take decisions. The manager should be given authority to get the work done systematically from the subordinates. Authority should always go with corresponding responsibility, e.g. if manager is given authority to complete a specific task within a given time, he would be held responsible for the same. Manager should have adequate authority to take managerial decisions on his own to achieve the goal.

(3) Principle of Discipline: Fayol insists that discipline is essential for smooth working of an organisation. It helps to achieve the goals set in the organisation. In relation to organisation, discipline means strictly obeying instructions of the superiors. There should be clear and utmost understanding between management and employees in respect to organisation’s rules. It is necessary to observe basic discipline at all levels of management.

(4) Principle of Unity of Command: According to this principle, every employee should receive orders and instructions from one boss only and he should be accountable to him only. If he receives orders from more them one boss at a time, he will not understand whose orders should be executed first. To avoid this, organisational hierarchy should be well defined and each employee in the organisation should know his immediate boss. He should receive orders and instructions from him only and should report to him only.
Maharashtra Board OCM 12th Commerce Solutions Chapter 1 Principles of Management 1

(5) Principle of Unity of Direction: Fayol advocates “One head for One plan”. It means that a group of employees working on similar activities should have common objectives and must work under one head (senior). All the objectives of the different groups should be in line with the objectives of the organisation. If this principle is followed there will be an effective co-ordination of the individual efforts and energies.

(6) Principle of Subordination of Individual Interest to Organisational Interest: According to this principle, the interest of the organisation must always be given greater importance than the interest of an employee or a group of employees. While taking decision, the manager should always consider the interest of whole group rather than the interest of an individual employee. Similarly, employees should surrender their personal goals or interests before that of an organisation e.g. while playing a game a team players should always play to win the game and not for his individual records.

Question 2.
Describe any four techniques of scientific management.
Answer:
(1) Work Study : Before allocating the work among the workers, systematic work study should be done by the management. Work study includes Em organised systematic and critical assessment of different activities or functions. It is based on the different techniques like time study, method study, motion study and fatigue study.
(i) Time Study : Under this method, the manager observes and record the time an employee takes to complete a particular job or task. This technique is useful to fix standard time needed to complete a specific task under given conditions. It measures the efficiency of an employee and helps to control the cost of work.

(ii) Method Study : In order to get best quality with cost effectiveness, it is important and challenging for a manager to identify the best method from various available methods to complete the specific job. This method is useful to reduce the wastage of time, raw material and to improve usefulness of the resources to achieve defined objectives. It is also useful to determine the methods to handle the raw materials, storage, inspection and transportation.

(iii) Motion Study : Motion study refers to the close study of the movements of employees as well as machines in completing a particular task. This technique is useful to manager to eliminate the unnecessary movements and to find out the best method of completing a specific task. It improves efficiency and productivity of the employees. This method is also useful to understand and decide about the elimination of some elements of a job or changing their sequence for smooth flow of work.

(iv) Fatigue Study : The term ‘fatigue’ implies physical or mental exhaustion. Long working hours with insufficient breaks, heavy working tools, target pressure and poor working conditions lead to fatigue. It reduces efficiency of the employees and creates adverse effect on their health. To reduce fatigue it is very important to keep and maintain the operational efficiency of the workers.

(2) Standardisation of Tools and Equipment:
On the basis of experiments conducted at work place, Taylor insisted to provide standard tools and equipment, standard working environment and standard methods of production. It helps to reduce spoilage and wastage of materials, cost of production, fatigue among the employees on the one hand and improves quality of work on the other hand.

(3) Scientific Task Setting : Taylor laid stress on the need for fixing a fair day’s work. The technique of scientific task setting is useful to restrain the employees from performing the task much below their capacity. As a result, they will complete their task according to the standards given and management will be able to keep proper control on the optimum use of available workforce.

(4) Scientific Selection and Training: By using scientific selection procedures, management easily select right persons for the right jobs. According to this technique, job specifications required to be fixed and employees are selected as per predetermined standards in an impartial way. After their selection, the management should arrange proper training programmes to increase efficiency.

(5) Functional Organisation : Taylor suggested that planning of the work is to be done by different people and actual work is to be supervised by different set of people. Every worker in the factory is to be supervised by two different sets of supervisors. He further suggested total eight foremen to control the various parts of the production. They are categorised as follows:
(A) At planning level:

Route clerk : Explains the movement of work from one machine to other.
Instruction clerk : Gives and records instructions to complete the work.
Time and cost clerk : Decides the time to complete the work and work out the cost.
Discipline : To see to it that workers work as per factory rules.

(B) At implementation level:

Gang Boss : Gets the actual work done from employees.
Speed Boss : Takes care that work is done in specified time.
Repair Boss : Manages security and maintenance of mechanism.
Inspector : Makes sure that work is completed as per specified standards.

5. Justify the following statements

Question 1.
Principles of management are flexible in nature.
Answer:
(1) Principles of management are the statements of fundamental truth which act as guidelines for managerial decision-making and action. They establish cause and effect relationship. They are evolved through observation, analysis and experiments.

(2) Principles of management although fundamental, are not rigid. They are flexible in nature in the sense they can be changed or modified according to the situation and requirements of the organisation. Managers can change these principles to suit the requirements of the organisation.

(3) Principles of management are flexible guidelines providing ample scope for making changes according to the nature of enterprise, its size, competitive situation, etc. For instance, in the context of present business scenario, at many places the ‘family management has been substituted by professional management’.

(4) Modern business world is dynamic. The situations in a business enterprise keep on changing continuously. No two circumstances are identical. Principles of management can be changed, adjusted or modified and used in the enterprise as per its changing needs and requirements. By identifying problems of business changes will be accepted.

Question 2.
Management principles are helpful in optimum utilization of resources.
Answer:
(1) Materials or abstract qualities that a person or organisation uses to perform the work is called resources, e.g. tools, stocks, time, employees, etc. In every organisation, two types of resources are used and they are: (i) Physical resources such as materials, machines, money, etc. and (ii) Human resources i.e. manpower.

(2) The different types of resources are used in the organisation to manufacture or produce different types of goods and services. The resources are scarce in relation to their demand and therefore resources should not be wasted and misused. They should be used carefully and up to their optimum capacity.

(3) The basic aim and function of management are to make and maintain proper balance and allocate these resources by putting them to maximum possible use and control on wastage of resources. Through the use of different techniques and management principles, management maintains discipline and healthy working environment to establish cordial relationship with the employees.

(4) It helps to increase the efficiency level of employees and to manage the administration effectively, e.g. use of modern and standard tools and machineries. It also helps to increase quality, productivity and level of efficiency of human resources.

Question 3.
Principle of equity is important.
Answer:
(1) The principle of equity suggests that employer should give kind, fair, just and equal treatment to the employees. Managers should be kind, impartial and fair to their subordinates.

(2) The principle of equity further states that there should not be any discrimination between the employees while making the payment of wages. The employees working on the same level but in different departments should be paid same wages.

(3) The wages payable to employees should not depend on the departments but the level at which they are working, e.g. Foremen should be paid higher wages than that is paid to employees working under them.

(4) The principle of equity also states that there should not be any discrimination between the employees while distributing work between them. As far as possible, there should be equal distribution of work. Thus, equality in treatment of employees boosts the morale and develops a sense of belongingness among the employees. It helps to develop loyalty of employees towards organisation and avoid conflicts.

Question 4.
Taylor emphasized on standardization of tools and equipment.
Answer:
(1) Fredrick Winslow Taylor published Principles of Scientific Management. His primary objective was to increase efficiency of employees by scientifically designing jobs. According to his views, management problems should be solved through experiments and use of scientific techniques rather than rules of thumb and triad and error approach.

(2) Taylor had conducted many experiments at workplace and as a result of those experiments, he advocated standardisation of tools and equipment. Standard here, means a level of quality or achievement, especially a level that is acceptable.

(3) According to him, standardised working environment and standardised methods of production tools and equipment help to reduce spoilage and wastage of materials. This in turn reduces the overall cost of production.

(4) Similarly use of standardised tools and equipment increases efficiency of employees and also helps to reduce fatigue among the workers. This improves the quality of work.

Question 5.
Differential piece wage rate plan is necessary.
Answer:
(1) According to F. W. Taylor, the differential piece wage rate plan is necessary to motivate the employees to attain higher standard performance and to earn remuneration at a higher rate. Differential piece wage rate plan suggests that remuneration should be fixed and paid in such a way that average worker is motivated to attain standard output.

(4) Thus, the differential piece-rate wage plan technique motivates the able employees to attain higher performance and earn wages at higher rate.

6. Attempt the Following

Question 1.
Explain in detail any five Principles of Management given by Henry Fayol’s?
Answer:
(1) Principle of Division of Work : According to this principle, the entire work such as technical, financial, commercial, accounting, management and security operations should be assigned to different employees as per their qualification, qualities, capabilities and experience. It gives benefits of specialisation and improves efficiency and expertise of employees. This in turn helps to attain expected productivity level.

Question 2.
Describe different techniques of scientific management.
Answer:
(1) Work Study : Before allocating the work among the workers, systematic work study should be done by the management. Work study includes Em organised systematic and critical assessment of different activities or functions. It is based on the different techniques like time study, method study, motion study and fatigue study.
(i) Time Study : Under this method, the manager observes and record the time an employee takes to complete a particular job or task. This technique is useful to fix standard time needed to complete a specific task under given conditions. It measures the efficiency of an employee and helps to control the cost of work.

Route clerk : Explains the movement of work from one machine to other.
Instruction clerk : Gives and records instructions to complete the work.
Time and cost clerk : Decides the time to complete the work and work out the cost.
Discipline : To see to it that workers work as per factory rules.

(B) At implementation level:

Gang Boss : Gets the actual work done from employees.
Speed Boss : Takes care that work is done in specified time.
Repair Boss : Manages security and maintenance of mechanism.
Inspector : Makes sure that work is completed as per specified standards.

Question 3.
Elaborate Principles of Scientific Management.
Answer:
The principles of scientific management are as follows:

Science, Not Rule of Thumb
Harmony, Not Discord
Mental Revolution
Co-operation, Not Individualism
Division of Responsibility
Development of employer and employees for greater efficiency and maximum prosperity

1. Science, Not Rule of Thumb : Rule of thumb method is based on personal judgements of the manager which should be substituted with the methods developed through scientific analysis of work. Taylor emphasised more on the use of scientific method for every small job. This principle related with selecting the best way of doing a work after scientific analysis. Under this method, standard required time and standard output are defined by the manager. This method is useful to save time and human energy, to get expected standard output and to increase organisational efficiency.

2. Harmony, Not Discord : This principle states that, in every organisation these should be proper co-ordination and harmonious relations between the management and employees. This will help in minimising conflicts between them and in achieving the goals of the organisation. The perfect understanding between employees and management is also helpful in creating healthy work environment. Organisation should also think about the maximum prosperity of the employees.

3. Mental Revolution : The concept of ‘mental revolution’ was introduced by Taylor. This principle highlights on the complete change in the attitude of the management and employees toward each other. Both should recognise their equal importance in the organisation. They should co-operate with each other to achieve goals or objectives of the organisation. This in turn will increase productivity and profits.

4. Co-operation, Not Individualism : This principle states that there should be mutual co-operation between employees and management. Co-operation, trust, team spirit, etc. are important to avoid internal competition and to create healthy working environment. Management should always appreciate and consider the suggestions given by the employees in decision-making process. The management should treat the employees as an integral part of the organisation in all respects. Employees should also resist themselves from going on strikes and making unacceptable or unnecessary demands from the management. Thus, they should see each other as two pillars of the organisation.

5. Division of Responsibility : This principle states that while dividing the work there should be’ corresponding division of responsibility between the managers and employees. Major planning should be done by the top and middle level management and employees should concentrate on its execution. The reporting of the jobs should be done by the subordinates as per the instructions given by their superiors. For the best performances, the management should always help, encourage and guide the employees.

6. Development of employer and employees for greater efficiency and maximum prosperity : Profitability and best performance of any organisation mostly depend on the skills, intelligence and capabilities of its employees. Arranging and providing training and development programmes for the employees at regular interval or whenever required are absolutely important. It helps to increase profitability of the organisation. Proper opportunity should be given to each ; employee to attain his highest efficiency and ; maximum prosperity.

Question 4.
Explain nature (characteristics) of principles of management.
Answer:
The nature (characteristics) of principles of management is (are) explained as follows:
(1) Universal application : Management principles are universal in nature. They are applicable to all types of organisations irrespective of the type, size or nature, e.g. government, college, hospital, bank. etc. Their application may have to be modified, but they are suitable for all kinds of organisations, whether in private sector or public sector. Similarly, principles of management are applicable to all levels of management. For instance, the principle of division of labour is applicable to all types of organisations.

(2) General guidelines : Management principles give general guidelines to tackle the organisational situations wisely and to solve the problems systematically. They are not rigid. Application of management principles depend upon the situation, size and nature of organisation, e.g., when we say according to principle of remuneration, the employees must be paid fair remuneration. The term ‘fair’ may vary as per nature, size and financial ability of the organisation.

(3) Principles are formed by practice and experiments : The management principles are developed gradually with thorough research work, experiments and systematic observations. The results of such observations and experiments are developed after their practice in different organisations.

(4) Flexibility : Management principles, although fundamental are not rigid statements. They have to be applied differently under various conditions. It is possible to make suitable changes in their application according to the requirement of the organisation. Thus, Management principles are flexible guidelines providing ample scope for making changes according to the nature of enterprise, its size, competitive situation, etc.

(5) Behavioural in nature : Management is a teamwork or a group activity. Management principles aim at influencing individual efforts and directing them to achieve various objectives of the organisation. They are directed towards regulating human behaviour so that people give their best to the organisation. Thus, principles of management are designed to influence human behaviour.

(6) Cause and effect relationship : Management principles indicate cause and effect relationship. Each principle has a definite effect on the efficiency or working of management. For example, payment of good remuneration and incentives increases output. Similarly, effective advertisement given by the organisation increases the sale of a product.

(7) All principles are of equal importance : All the principles of management have equal importance and they also carry equal weightage with reference to their applicability in the organisation. For example, it cannot be said that the principle of division of labour is more important than the principle of unity of command or vice versa. Management principles are not static in nature. They are not absolute like principles of pure sciences like Chemistry, Mathematics, etc. They are the principles of social science. They are to be modified and applied according to the size and nature of the organisation, keeping in mind the requirements.

7. Answer the following questions

Question 1.
What are the techniques of scientific management? Explain in detail.
Answer:
The techniques of scientific management given by F. W. Taylor are explained as follows:
(1) Work Study : Before allocating the work among the workers, systematic work study should be done by the management. Work study includes Em organised systematic and critical assessment of different activities or functions. It is based on the different techniques like time study, method study, motion study and fatigue study.

(i) Time Study : Under this method, the manager observes and record the time an employee takes to complete a particular job or task. This technique is useful to fix standard time needed to complete a specific task under given conditions. It measures the efficiency of an employee and helps to control the cost of work.

Route clerk : Explains the movement of work from one machine to other.
Instruction clerk : Gives and records instructions to complete the work.
Time and cost clerk : Decides the time to complete the work and work out the cost.
Discipline : To see to it that workers work as per factory rules.

(B) At implementation level:

Gang Boss : Gets the actual work done from employees.
Speed Boss : Takes care that work is done in specified time.
Repair Boss : Manages security and maintenance of mechanism.
Inspector : Makes sure that work is completed as per specified standards.

(6) Differential Piece – Rate Wage Plan : Taylor suggested that discrimination should be made between efficient and less efficient workers. In this technique, the standard is determined (fixed) for production. The workers who produce more than the standard output are to be paid remuneration at higher rates and those who produce less them the standard quantity are to be paid at lower rate of wages. This technique encourages the employees to attain higher standard performance to earn higher wages.

Question 2.
Explain 14 principles of Henry Fayol in detail.
Answer:
Henry Fayol, the Father of Modern Management developed the following 14 principles:
principles of management:

Principle of Division of Work
Principle of Authority and Responsibility
Principle of Discipline
Principle of Unity of Command
Principle of Unity of Direction
Principle of Subordination of Individual Interest to Organisational Interest
Principle of Centralisation
Principle of Remuneration
Principle of Scalar Chain
Principle of Order
Principle of Equity
Principle of Stability of Tenure
Principle of Initiative
Principle of Esprit de corpse (Team Work)

1. Principle of Division of Work: According to this principle, the entire work such as technical, financial, commercial, accounting, management and security operations should be assigned to different employees as per their qualification, qualities, capabilities and experience. It gives benefits of specialisation and improves efficiency and expertise of employees. This in turn helps to attain expected productivity level.

2. Principle of Authority and Responsibility: Authority implies right or freedom to take decisions. The manager should be given authority to get the work done systematically from the subordinates. Authority should always go with corresponding responsibility, e.g. if manager is given authority to complete a specific task w12. Principle of Stability of Tenure:ithin a given time, he would be held responsible for the same. Manager should have adequate authority to take managerial decisions on his own to achieve the goal.

3. Principle of Discipline: Fayol insists that discipline is essential for smooth working of an organisation. It helps to achieve the goals set in the organisation. In relation to organisation, discipline means strictly obeying instructions of the superiors. There should be clear and utmost understanding between management and employees in respect to organisation’s rules. It is necessary to observe basic discipline at all levels of management.

4. Principle of Unity of Command: According to this principle, every employee should receive orders and instructions from one boss only and he should be accountable to him only. If he receives orders from more them one boss at a time, he will not understand whose orders should be executed first. To avoid this, organisational hierarchy should be well defined and each employee in the organisation should know his immediate boss. He should receive orders and instructions from him only and should report to him only.
Maharashtra Board OCM 12th Commerce Solutions Chapter 1 Principles of Management 3

5. Principle of Unity of Direction: Fayol advocates “One head for One plan”. It means that a group of employees working on similar activities should have common objectives and must work under one head (senior). All the objectives of the different groups should be in line with the objectives of the organisation. If this principle is followed there will be an effective co-ordination of the individual efforts and energies.

6. Principle of Subordination of Individual Interest to Organisational Interest: According to this principle, the interest of the organisation must always be given greater importance than the interest of an employee or a group of employees. While taking decision, the manager should always consider the interest of whole group rather than the interest of an individual employee. Similarly, employees should surrender their personal goals or interests before that of an organisation e.g. while playing a game a team players should always play to win the game and not for his individual records.

7. Principle of Centralisation: Centralisation means concentration of authority or power in a few hands at the top level. As number of employees is less in a smaller organisation there is centralisation of authority. Decentralisation means even distribution of authority or power at every level of management. As number of employees and levels of management are more in a larger organisation, there must be decentralisation of some authorities for its smooth functioning. According to Fayol, there must be a proper balance between centralisation and decentralisation, depending upon the nature and size of an organisation.

8. Principle of Remuneration: According to this principle, the employees must be paid fair and appropriate remuneration to keep them satisfied financially and to retain them within the organisation for longer period of time. While fixing remuneration various factors such as the skill, knowledge, expertise, tenure, cost of living, market trend, profitability of organisation, etc. should be considered. It boosts the morale of employees and increases efficiency and productivity.

9. Principle of Scalar Chain: According to Fayol, in the organisation decisions, orders, instructions, messages, etc. must be passed through a chain, i.e. from the general manager to the respective functional manager, then to the supervisor, then to the foreman and then ultimately, to the workers. Similarly, suggestions, information, grievances, etc., must flow from the worker in the upward direction. This is called Scalar Chain. Sometimes, following a scalar chain becomes a lengthy process. In such cases, ‘Gang Plank’ is followed which permits speedy and direct communication between the employees working at the same level of authority. However, for this, permission of the proper authority is necessary.

10. Principle of Order: The principle of order is based on ‘a place for everything and everything in its place’. According to this principle, in every organisation there should be proper, systematic and orderly arrangement of men and materials. There should be a fixed place to keep every material and thing used in the organisation and a fixed place or a seat for every employee. The purpose of this principle is to reduce wastage of time and energy. This principle emphasises more I on the proper and optimum utilisation of physical and human resources.

11. Principle of Equity: This principle states that the management should be fair as well as friendly to the subordinate staff. There should be no discrimination of employees in regard to division of work, delegation of the authorities, deciding the monetary terms, etc. This principle also states that the remuneration should depend not on the department but at the level at which employees are working, It means the employees working on the same level but in separate departments must be paid equal wages. It will also help in avoiding conflicts in an organisation.

12. Principle of Stability of Tenure: According to this principle, at the time of recruitment of employees, the management should assure them about the stability of tenure (i.e. job security). This creates a sense of belonging among the employees. Job security increases efficiency of the employees and minimises employees turnover ratio.

13. Principle of Initiative: Initiative means to do the work in an innovative way in his or her personal capacity. According to this principle, managers should give freedom, opportunity or encourage the subordinates to take initiative while working on given job. Their suggestions and ideas should be invited before framing the plan. This can work as a morale booster for the employees and leads to timely achievement of organisational goals.

14. Principle of Esprit de corpse (Team Work): ‘Esprit de corpse’ means union is strength. This principle integrates and co-ordinates the individual and group efforts. It emphasizes the spirit of teamwork. The manager as a leader should create the feeling of team spirit and understanding among the various groups. When entire group of employees works as a team, their efforts get directed towards realising the goals of the organisation.